杭州附近有没有服务

 Logo of vibrating screen manufacturer

Website map

TEL:18637302099

News Center

Your location: Vibrating screen manufacturer > Knowledge of vibrating screen > Vibrating screen software >Main points for attention in use of vibrating screen

Main points for attention in use of vibrating screen

Use Vibration sieve The main considerations are as follows
 
1. When replacing other new screens, the screen must be tightened before bonding, otherwise the vibration effect of the vibrating screen will be affected;
 
2. The connector nut of the connecting line between the chassis and the power box must be tightened to prevent the power line from wearing after the nut is loose;
 
3. When the noise in the power control box is too loud or hot, the user should timely replace the fan with the same specification in the control box;
 
4. According to the specific gravity of the material to be screened, the frequency of the vibrating screen should be greatly adjusted, and the operation must be carried out according to the actual material;
 
5. The output power of the power control box should be as small as possible when the vibrating screen meets the production requirements;
 
6. Ensure that the lower end of p-type grille and grid bolts are not loose, and regularly check whether they are loose;
 
7. When the ultrasonic control box or sensor goes out.
Causes and solutions of abnormal noise of vibrating screen
 
When the vibrating screen linear screening machine is running, if there is abnormal sound, the inspection should be stopped immediately, so as to avoid damage to other parts of the screening machine, or even stop the production line. Generally, you can check from the following aspects:
 
If the shaker transport bracket is not removed, it should be removed immediately.
 
If the collar bolt is not locked or the collar is not fully installed, immediately lock the nut or lock the copper nut and tap the collar with a wooden hammer.
 
The foundation of the vibrating screen is not smooth, the foundation should be stable, and the rubber plate on the base of the vibrating screen is better.
 
If the vibrator spring is broken or dislocated, replace it with spring or reset it.
 
The vibrating screen body and outlet contact with hard objects, and the space is removed, and the spacing is more than 0.5 m.
 
The fastening bolt of vibration motor is loose, and the bolt of vibration motor is locked immediately.
 
The connection between the feeding and discharging ports of the vibrating screen can not be rigidly connected, but can be connected by flexible or cloth bags.
 
If the bearing of vibrating screen is damaged, replace it immediately.
 
If the vibrating screen breaks, it should be closed immediately for maintenance and replacement.

Related news:

Related products: